Bolid Signal-10 Manual de usuario descargar pdf (Pagina 33)

Signal-10 Operation Principles

33 www.bolid.com

№ Program Description

Initial

Condition

Blink From On

Condition

The relay is switched on/off once per second if

there is an Intrusion Alarm or Fire Alarm

Blink for a Time From

Off Condition

The relay is switched on/off once per second for a

specified time if there is an Intrusion Alarm or Fire

Alarm

Off

Blink for a Time From

On Condition

The relay is switched on/off once per second for a

specified time if there is an Intrusion Alarm or Fire

Alarm

9 Lamp

In case of a Fire Alarm the relay is switched on/off

alternately twice per second

In case of a Fire Prealarm the relay is switched on

for a short time every second

In case of an Intrusion Alarm, or Entrance Alarm,

or Arming Failed the relay is switches on/off alter-

nately once per second

In case of a Trouble the relay is switched on for a

short time once per two seconds

If an alarm loop is armed the relay is switched on

If all alarm loops are disarmed the relay is

switched off

10 Alarm Output 1

If all the alarm loops related with the relay are

armed then the relay is switched on, otherwise the

relay is switched off

11 ASPT

The relay is switched on for a given time if two or

more alarm loops related with the relay have Fire

Alarm status and there are no Auxiliary loops bro-

ken. The broken Auxiliary loop will block switching

on. If the Auxiliary loop is broken while the Relay

Activation Delay has not yet expired then, after

recovering of the loop, the relay output will be

switched on for a specified time. (That is, breaking

of the Auxiliary loop temporary blocks activation

delay counting.)

Off

12 Siren

In case of a Fire Alarm the relay is switched on/off

for a specified time in mode ‘On for 1.5s and Off

for .5s’

In case of a Fire Prealarm the relay is switched

on/off for a specified time in mode ‘On for .5s and

Off for 1.5s’

In case of an Intrusion Alarm the relay is switched

on for a specified time

Otherwise the relay is off

Off

13 Fire Output

If the related loop has Fire Alarm or Fire Prealarm

status then the relay is switched on, else the relay

is switched off (open)

14 Trouble Output

If there are related alarm loops having Trouble,

Arming Failed, or Disarmed status, the relay is

switched off. Otherwise the relay is switched on

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 95 96

Comentarios a estos manuales

Sin comentarios

Bolid Signal-10 Manual de usuario Pagina 33

Comentarios a estos manuales