search

Bolid Signal-10 Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 96
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
Orion ISS
www.bolid.com 8
The device can be powered by one or two (the main and the extra) power supplies providing 12 or 24
Volt of DC. It is strongly recommended to use Bolid manufactured battery backed power suppliers of
series RIP-12 or RIP-24.
To program the Signal-10 device for adapting to particular user conditions and meeting specific user
needs the Orion device configuration tool, UProg.exe program, has to be used. The latest version of
the UProg Configuration Tool can be downloaded from the Bolid website at the address of
www.bolid.com
. To program the device by means of the UProg, it should be connected to a PC with
UProg.exe installed via one of Bolid manufactured interface converters such as PI-GR, S2000-PI,
S2000-USB, or USB-RS485.
The Signal-10 is equipped with a tamper switch which provides generating tamper alarms while tam-
per conditions are changed and transmitting them to a network controller.
The Signal-10 Intrusion and Fire Alarm Panel is intended for indoor installation and round the clock
operation. The device is not suitable for operation in corrosive and dusty environments, as well as in
fire-hazardous or explosive areas.
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 95 96

Comentarios a estos manuales

Sin comentarios
  • Saitek Adept technology Trim-tex Dot Hill Systems Chord
  • Presto Fabricantes De Jugos NEC Mini pc Coleman Cable Luces de trabajo PNY Discos de estado sólido PCD No
  • Ryobi RY15550 Asus M2N68-AM Brother DCP-9270CDN Adobe Photoshop CS4
  • Dell 946 Manual de usuario Yamaha R-N301 Manual Opel Meriva Manual de usuario Adlink PCI-7432 Manual de usuario